User manual

4 - 44 MicroVision FX
Formatting disks
You must format disks on a MicroVision FX console before you can
record shows on them. MicroVision FX cannot record shows on
unformatted disks or disks that are formatted on other types of ETC
consoles or personal computers. Each MicroVision FX disk can hold five
shows.
Warning: Formatting a disk erases all information previously recorded on
it. It does not affect the current show in console.
To format disk, follow these steps:
1. Insert standard double-sided, double-density 3.5-inch computer disk
in disk drive.
2. Press [Set Up].
3. Select 3, Format disk, and press [Enter].
4. Begin formatting by pressing [Enter].
Or, cancel format operation by pressing [Clear].