User manual

4 - 42 MicroVision FX
Controlling chases with audio input
The Audio setting on MicroVision FX 's Rate pot allows you to use input
from an audio source (tape, CD, LP, or live music) to control chase rate.
The processor detects notes in certain low frequencies (usually the bass
drum part) and uses them to set the chase rate.
Follow these steps to use audio input to set chase rate:
1. Create the chase using the techniques described on pages 4 - 37
through 4 - 40.
2. Insert the audio connector into the output labeled Audio on the
console's back panel.
3. Select Audio with the rate pot.
4. Use the switch labeled Light/Dark/Off to start the chase running.