User manual

4 - 36 MicroVision FX
Deleting submasters
You must be in Blind to delete submasters. You can delete all submaster
memories, or the entire show, from the Set Up Menu.
To delete individual submasters, follow these steps:
1. Press [Blind] and then [Sub].
2. Enter submaster number you want to delete.
3. Press [Clear] [Record] to delete the submaster.
To clear all submasters and submaster pages, follow these steps:
1. Press [Set Up].
2. Select 5, Clear all submasters and submaster pages, and press
[Enter].
3. Press [Enter] to delete all recorded submasters.
Or, press [Clear] to cancel the action.
To clear the entire show including all cues, submasters, chases and
softpatch, follow these steps:
1. Press [Set Up].
2. Select 6, Clear system, and press [Enter].
3. Press [Enter] to clear entire show.
Or, press [Clear] to cancel the operation.
Warning: When you initiate Clear system, all show data stored in
MicroVision FX is lost; system settings are not affected. Save the
current show on disk if you do not want to permanently lose all show
information.