User manual

Chapter 4 Tutorial 4 - 35
Copying submasters
You may want to copy a submaster, or use submasters as building
blocks for new submasters. To copy a look from one submaster to
another in Stage, follow these steps:
1. Press [Stage].
2. Set submaster pot(s) that you want to copy at desired level.
3. Make any additional adjustments you want, such as selecting
channels to add, playing back cues through fader pairs or bringing up
other submasters.
4. Press [Record].
5. If you want to save the submaster to a page other than the currently
loaded submaster page, press [Page], then enter the page number
onto which you want to copy the submaster.
6. Press [Sub] and enter new submaster number, and press [Enter], or
press the submaster bump switch.