User manual

4 - 34 MicroVision FX
Recording submaster on a different page
You may record a submaster to a page other than the one currently
loaded. For example, if you have page one loaded, you can create a look
on stage, and record it to page two if you wish. To do so, follow these
steps:
1. Create a look on the screen.
2. Press [Record].
3. Press [Page].
4. Enter the page number on which you want to record submaster.
5. Press the bump switch of the submaster in which you want to
record the look.
Modifying submasters
To modify a recorded submaster, follow these steps:
1. Press [Blind] to display Blind mode.
2. Press [Sub] and the number of the submaster you want to modify.
3. To add or change channels:
Select channel numbers and set desired levels.
To change all channels proportionally:
Select channels at current levels, then move the fader wheel to
proportionally modify levels.
To delete channels:
Select channels and press [At] [0][0] to set them to 00.
4. Press [Rec] and [Enter].