User manual

Chapter 4 Tutorial 4 - 33
Recording a submaster
Creating a submaster is as easy as creating a cue. You can create
submasters in Stage or Blind mode. To create a submaster, follow these
steps:
1. Select channel and level settings as you did for cues. See Lesson 2,
Creating cues if you need a review. You can use channel settings
from other submasters or cues by bringing up a recorded look, then
modifying it as you desire.
2. Press [Record] then [Sub].
3. Enter the submaster number you want to record, and press [Enter].
Or, press [Record] and the submaster bump switch where you want
to record the look.
4. Press [Rel] to release captured channels.
5. Push the submaster pot up. The channels you recorded come up at
the proportional levels you recorded.