User manual

Chapter 4 Tutorial 4 - 29
Modifying cues on stage
To modify and record a cue on stage, follow these steps:
1. Press [Stage].
2. Press [Cue], and enter cue number.
3. Press [Go] to playback cue.
4. Push faders down and back up to override fade times.
5. Modify cue.
6. Press [Record].
7. To rerecord as same cue, press [Enter]. Or, to record as a new cue,
enter new cue number, and press [Enter].
8. Press [Rel] to release captured channels.
Note: If you rerecord as the same cue, the modifications you make
appear on stage immediately.