User manual

Chapter 4 Tutorial 4 - 23
Viewing cues
Once you have created a few cues, you may want to look at them. You
can view stored cues in two ways, live in Stage mode, or on the screen
in Blind mode.
To view cues live, you must select the cue and play it back in a fader;
see Lesson 3: Playing back cues for instructions.
To view a cue on the screen only, select Blind mode and enter the cue
number you want. To view a different cue, press [Cue] and the new cue
number that you want to see.
Note: When you press [Blind], the last cue run or recorded is displayed.
You can also use [+] and [-] to move through recorded cues one at a time
in Blind. Press [Cue]; thereafter [+] displays the next cue, and [-] displays
the previous cue.