User manual

4 - 22 MicroVision FX
Deleting cues
You must be in Blind to delete individual cues. To delete all cues, select
Clear all cues from the Set Up Menu. To clear complete show, select
Clear system from the Set Up Menu.
To delete individual cues, follow these steps:
1. Press [Blind] and then [Cue].
2. Enter cue number you want to delete.
3. Press [Clear].
4. Press [Record] to delete the cue or [Record] then [Clear] to cancel
the action.
To delete all cues from console memory, follow these steps:
1. Press [Set Up].
2. Select 4, Clear all cues, and press [Enter].
3. Press [Enter] to delete all cues from console memory, or press
[Clear] to cancel the action.
To clear entire show from console memory, follow these steps:
1. Press [Set Up].
2. Select 6, Clear system, and press [Enter].
3. Press [Enter] to clear entire show from console memory, or [Clear]
to cancel the action.
Warning: When you initiate Clear system, all show data stored in
MicroVision FX is lost; system settings are not affected. Save the
current show on disk if you do not want to permanently lose all show
information.