User manual

Chapter 4 Tutorial 4 - 21
Copying cues
Once you have created a cue, you may copy it and give it a new number.
This can be helpful if you want to create a cue based on one you have
already recorded. You can copy cues in Stage or Blind mode.
Follow these steps to copy a cue:
1. Press [Blind] or [Stage]. You can copy a cue in either mode.
2. If you are working in Blind mode, press [Cue], then enter the num-
ber of the cue you want to copy. Or, if you are working in Stage
mode, press [Cue], enter the number of the cue you want to copy,
then press [Go].
3. In either Stage or Blind, once the cue is displayed, press [Rec] [Cue],
the number of the new cue, and [Enter]. The new cue will be
recorded; the original cue will not be affected.
Copying cue keystrokes:
Key Action
[Blind] or [Stage] Selects operating mode.
[Cue] [1] or Displays selected cue.
[Cue] [1][Go]
[Rec] [Cue] [2] [Enter] Copies Cue 1 and records copy as
Cue 2.