User manual

4 - 20 MicroVision FX
Inserting cues
You may want to insert a cue between recorded cues. For example, you
may want to modify cue 1 slightly and insert it between cues 1 and 2.
You can number cues with a one-digit decimal. Therefore, you can insert
up to nine cues between one and two (1.1, 1.2, etc.). To modify and
insert a cue, follow these steps:
1. Press [Blind]. MicroVision FX automatically prompts you for a cue
number.
2. Enter cue number you want to modify.
3. Make modifications.
4. Press [Record].
5. Enter cue number with a decimal to insert it between cues. If you do
not enter a new cue number, you will overwrite the existing cue.
6. Press [Enter].
Insert cue keystrokes:
Key Action
[Blind] Displays Blind mode screen.
[1] Displays cue 1.
[Chan] [1][0] Modifies cue.
[Thru] [1][5],
fader wheel
[Record] Indicates you want to record cue.
[1] [.] [1] Enters cue number 1.1.
[Enter] Records and inserts cue 1.1 between cues 1 and 2.