User manual

4 - 18 MicroVision FX
Cue 5: Creating a cue using Rem Dim
Often you will create cues by adding to, subtracting from or modifying
previously recorded cues. [Rem Dim] lets you select a subset of dis-
played channels and delete all others.
Assuming you are still in Blind and have cue 4 displayed, follow these
steps to create a cue using [Rem Dim]:
1. Press [Chan] to indicate that the next number entered will be a
channel number.
2. Enter channel number to mark the beginning of the subset to select.
3. Press [And] or [Thru] to indicate you are selecting a range of chan-
nels.
4. Enter another channel number with numeric keypad to mark the end
of the range.
5. Press [Rem Dim]. MicroVision FX sets all unselected channels to a
level of zero.
6. Move the fader wheel, press [At], [+] and [-], or use [At] and numeric
keypad to set desired level.
7. Press [Record] to indicate that you want to record the cue.
8. Enter cue number with numeric keypad.
9. Press [Enter] to record cue.