User manual

4 - 12 MicroVision FX
Cue 2: Creating a cue in Blind
Follow these steps to create a cue in Blind mode, for a range of chan-
nels, using [Full]. MicroVision FX automatically enters 00 for channels
you used in cue 1 to indicate that they will fade out in cue 2.
1. Press [Blind]. MicroVision FX displays Blind mode screen. You do
not have live control of channels in Blind. MicroVision FX automati-
cally prompts you to enter cue number.
2. Enter cue number you want to display or record.
3. Press [Chan] to indicate that the next number entered will be a
channel number.
4. Enter a channel number.
5. Press [Thru] to indicate you are entering a range of channels.
6. Enter the last channel number in ther range. Selected channels are
highlighted or displayed in yellow.
7. Press [Full] to set channels at full intensity level.
Note: When using [Full], you do not have to press [At] first.
8. Press [Record] to indicate that you want to record the cue.
9. Press [Enter].