User manual

Chapter 4 Tutorial 4 - 7
Record functions
MicroVision FX has two record functions: Record and Track. Record
saves all channels as they appear on the screen (what you see is what
you get) in the cue or submaster you specify. When you use Record to
record a cue, levels are recorded in only the cue you specify.
Track is a record function that works only for cues. It allows you to build
a new cue from the previous cue’s channel settings. Tracked channels
are channels whose levels do not change from one cue to the next. A
track often runs through several cues for the length of a scene or an act.
Track also allows you to add channels through existing cues. For ex-
ample, if you have created all cues for a scene, and then decide to add a
new channel or group of channels to all cues, Track lets you do so with
one short record command. To do the same thing with Record would
require you to add the channels to each cue individually.
The Track record function is described in Lesson 7 in this chapter.