User manual

3 - 6 MicroVision FX
Patching dimmers to channels
Each dimmer can only be patched into one channel at a time. Follow the
steps below to create a custom softpatch.
1. Press [Patch]. MicroVision FX displays the following screen.
2. Select dimmers to assign to a single channel.
To select a single dimmer:
a) Enter the dimmer number.
b) Press [Enter].
To select a range of consecutive dimmers:
a) Enter beginning dimmer number.
b) Press [Thru].
c) Enter the ending dimmer number.
d) Press [Enter].
To select a discontinuous set of dimmers:
a) Enter dimmer number.
b) Press [And].
c) Enter additional dimmer numbers, pressing [And] between each.
d) Press [Enter] after you have selected all desired dimmers.