User manual

Chapter 2 Installation 2 - 13
Installing Remote Go
A MicroVision FX console configured for an optional Remote Go provides
a 25-pin connector on the back panel. The remote unit connects to the
MicroVision FX console via a 24 AWG, aluminum-shielded, multi-conduc-
tor cable with one twisted pair designated for each switch (Belden 9507
S-R PCV Insulated or Alpha 5477 80 Deg. C 300 V PVC). The cable
connector at the remote unit will vary depending on the unit itself.
Remote Go connector and pinout
Console connector Remote connector
DB-25 female Connector type depends on
unit
Pin Function
1 - AB Hold
2 - AB Go
3 - AB Back
4 - Cue 1
5 - CD Hold
6 - CD Go
7 - Plus
8 not connected
9 not connected
10 Common
11 + 12V DC
12 not connected
13 not connected
14 + AB Hold
15 + AB Go
16 + Back
17 + Cue 1
18 + CD Hold
19 + CD Go
20 + Plus
21 not connected
22 not connected
23 Common
24 + 12V DC
25 not connected