User manual

2 - 4 MicroVision FX
8. Turn console and monitor power switches to their On positions.
9. Press [Setup].
10. Select 7, System settings, press [Enter]. MicroVision FX displays
System Settings Menu.
11. Select 9, Color/monochrome monitor, press [Enter].
MicroVision FX displays Color/Monochrome Monitor selection menu.
12. Select the proper setting for your monitor, either 1 for color, or 2 for
TTL or composite monochrome monitor.
Installing two monitors
You may want to install two monitors at the same time, one next to the
console and one at a remote location. Install one monitor using the DB9
video connector, and the other using the BNC video connector.
The color monitor should be located next to the console because the
length of the color cable is limited to about 10 feet. The monochrome
cable (RG59U) can be as long as 150 feet. Therefore, use the mono-
chrome monitor at the remote location.