User manual

7 - 40 MicroVision FX
Rem Dim
[Rem Dim] lets you select a channel or a group of channels and suppress
all others to a level of zero. [Rem Dim] is useful for selecting part of a
look currently displayed on your screen (in any mode) and recording only
that portion.
You may also want to use [Rem Dim] to isolate a subset of a live look
to readjust or refocus those channels without the other channels
interfering.
[Rem Dim] also allows you to record a blackout cue by setting all chan-
nels to zero.
Using Rem Dim in Stage
1. Select the channels you want to isolate.
2. Press [Rem Dim]. Selected channels remain at current levels; all
other channels are suppressed to zero.
3. Now you can work with the selected channels live, save them as a
cue or submaster, or use them as you would any other set of
selected channels.
4. Press [Rel] to return channels to levels set in fader pair, or
[Rem Dim] again to set all channels to zero.
Using Rem Dim in Blind
1. Select a subset of the current channels displayed.
2. Press [Rem Dim]. All unselected channel levels are automatically
reset to zero.
3. You can now save the selected channels as a cue or submaster.