User manual

Chapter 7 Reference 7 - 39
Rel
[Rel] releases captured channels. Captured channels are live channels
that you have selected in Stage mode. Captured channels may or may
not be under direct control of the keyboard.
When you press [Rel], MicroVision FX first releases captured channels
that are under direct keyboard control (selected channels). If you press
[Rel] again, MicroVision FX releases all remaining captured channels.
Captured channel levels always take precedence over other controls. For
example, assume a channel is included in a submaster which sets it at
75 percent. If you capture the same channel and set it to 50 percent, the
50 percent setting takes precedence. When you release it, it returns to
the level determined by other outputs.
Note: You can release a subset of all captured channels by selecting the
channel(s) and pressing [Rel]. Other channels remain captured.