User manual

Chapter 7 Reference 7 - 29
Link
[Link] joins two or more recorded cues to one another so that they
playback automatically in the sequence you link them. Each cue in the
link counts as one cue in the 200 cue limit.
To link cues, follow these steps:
1. In either Stage or Blind, press [Cue].
2. Enter number of first cue you want in linked sequence.
3. To link cue to another cue, press [Link]. Then enter number of
second cue in linked sequence.
4. Press [Link] again to enter desired delay time. Enter the delay time
in minutes and seconds or as a fraction of a second in decimal
format. For example, all of the following are acceptable: .2, 00:12,
5.5, 5:30. Delay time can be as long as 99:59.
The delay time is the length of time between the beginning of a cue
and the beginning of the cue to which it is linked. MicroVision FX
calculates and enters a default delay time. The default delay time is
the total running time of the first cue in the sequence.
The total running time is whichever is longer of the upfade and the
downfade times. The default delay time plays the entire first cue,
and then plays the second cue immediately afterward.
5. To link more than two cues, repeat steps two through five for each
link.
Note: To change the delay time for a cue that is already linked to
another cue, select the first cue in the link, press [Link] twice, enter
the delay time, and press [Enter].