User manual

Chapter 7 Reference 7 - 21
Diagnostic system clear
A diagnostic system clear erases all cues, submasters, chases, and real-
time programs, and resets default fade time and full levels, number of
channels, number of dimmers, and softpatch configuration to their
factory default settings.
Warning: When you initiate a diagnostic system clear, all show data
stored in MicroVision FX is lost. Save the current show on disk if you do
not want to lose it permanently.
Follow these steps to initiate a diagnostic system clear:
1. If your console is running, turn power off.
2. Press and hold [7] [8] [9] on the numeric keypad.
3. Without releasing [7] [8] [9], turn power on.
4. Release [7] [8] [9] when MicroVision FX 1.20 screen display appears
on screen.