User manual

7 - 20 MicroVision FX
Delay time
To change the delay time for linked cues, follow these steps:
1. Press [Cue], and enter the first cue in the link.
2. Press [Link] twice.
3. Enter the delay time in minutes and seconds either in minutes and
seconds or with a fraction of a second in decimal format. For ex-
ample, all of the following are acceptable: .2, 00:12, 5.5, 5:30. Delay
time can be as long as 99:59 minutes.
4. Press [Enter].
Example
[Cue] [1] [Link] [Link] [5] [Enter] enters a delay time of five seconds for
cue 1, when cue 1 is already linked to anther cue.