User manual

7 - 18 MicroVision FX
Cue
[Cue] allows you to select a cue to display in Blind mode or to play back
in Stage mode. Pressing [Cue] indicates that the next number entered
will be a cue number.
To display a cue in Blind mode, follow these steps:
1. Press [Blind].
2. Press [Cue].
3. Enter cue number you want to display. MicroVision FX displays the
channel settings for the cue. Channels are not live.
Channels that were used in the previous cue, but are not included in
current cue are displayed with a zero level to indicate a downfade
from the previous cue.
Selecting cues in Stage
To select a cue to playback in Stage, follow these steps:
1. Press [Stage].
2. Press [Cue].
3. Enter cue number you want to playback next. MicroVision FX moves
the cue you enter to the top of the cue sheet and highlights it.
4. Press either [Go] key. Cue plays back. To avoid fade times, pull fader
pair controls down to 0 and back to 10.