User manual

Chapter 7 Reference 7 - 17
Clear system
The Clear system option erases all cues and resets number of channels
and dimmers, and softpatch to factory default settings. Other system
settings, such as submasters, output protocol, analog inputs, and
monitor color are not affected.
Warning: When you initiate Clear system, all show data stored in
MicroVision FX is lost. Save the current show on disk if you do not want
to permanently lose all show information.
The Clear system option is included on the System Settings Menu.
Follow these steps to initiate the system clear option:
1. Press [Set Up].
2. Select 6, Clear system, and press [Enter].
3. Press [Enter] to clear the current show from the console memory.
Or, press [Clear] to cancel the action.
Example
[Set Up] [6] [Enter] [Enter] clears system.