User manual

7 - 10 MicroVision FX
Chase controls
The three toggle switches above the Rate and Step rotary pots allow you
to turn chases on and off, select chase types, and determine how chase
rate is controlled. The settings and functions of each of the three
switches are described below. For more information on creating chases,
see pages 4 - 38 through 4 - 42.
Forward/Reverse/Bounce
This switch allows you to select from three types of chase.
Forward
In a forward chase, the chase steps run in ascending numerical
sequence.
Reverse
In a reverse chase, the chase steps run in descending numerical
sequence.
Bounce
In a bounce chase, the chase runs alternately in ascending then
descending numerical sequence.
Rate/Audio/Both
This switch allows you to select how chase rate is determined.
Rate
Setting the switch to Rate allows you to control the chase rate by
setting the Rate pot.
Audio
Setting the switch to Audio allows you to control the chase rate by
connecting the console to a music source through the connector labeled
Audio on the back panel. MicroVision FX automatically sets the chase
rate based on the tempo of the music.
Both
Setting the switch to Both the chase is simultaneously controlled by
both the setting of the Rate pot and the input the console receives via
the audio input.