User manual

Chapter 7 Reference 7 - 7
Bump switches
Bump switches immediately push submasters to 100 percent and hold
them at that level for as long as you press the bump switch.
You may also use bump switches to indicate in which submaster you
want to record a current look. To record a submaster using the bump
switch, follow these steps:
1. In either Stage or Blind mode, create a look.
2. Press [Record] to indicate that you want to save the look.
3. Press the bump switch of the submaster in which you want to
record the look. Then press [Rel] to release captured channels.