User manual

7 - 2 MicroVision FX
And
[And] allows you to select a set of channels, cues or dimmers that has a
break in the numerical sequence. You can then enter an intensity level
for the set. For example, you can select channels 1 and 7 and 9.
You can also use [And] in conjunction with [Thru] to select a set such as
1 through 10 and 15 through 20.
To select a discontinuous set of cues or channels follow these steps:
1. Press [Chan] or [Cue] (whichever you are selecting).
2. Enter a channel or cue number.
3. Press [And].
4. Enter a second channel or cue number.
Hint: You can combine the use of [And] and [Thru]. For example, [1]
[And] [5] [Thru] [9].
Example
[Chan] [1] [And] [5] selects channels one and five.