User manual

Chapter 6 Accessories 6 - 21
Analog outputs
Analog outputs are analog control signals that originate from the
MicroVision FX
console.
MicroVision FX
provides 32, 64 or 96 analog
outputs depending on your console’s configuration.
Analog outputs work in conjunction with any other output protocol on
your console. They can be softpatched to any channel, but always start
as dimmer 1.
Note: If your analog dimmers stay at full after you turn on your console,
check the System Settings for the correct setup. Most likely your analog
outputs have been disabled.
Follow these steps to enable or disable analog outputs:
1. Press [Set Up].
2. Press [7], System Settings, and [Enter].
3. Press [8], Analog Outputs, and [Enter].
4. Enter 1 to enable analog outputs, or 2 to disable analog outputs.
5. Press [Enter].