User manual

Chapter 6 Accessories 6 - 19
Remote Go
Remote Go enables you to control up to seven MicroVision FX functions
from a remote location.
ETC provides the internal circuitry and the back panel connector for
Remote Go. You must provide the remote control unit itself, as well as
appropriate cable and connectors.
You can activate Remote Go functions with a momentary closure
switch. This switch will often be a push button on a stage manager’s
remote control panel.
Remote Go functions are described below.
Cue 1 Selects Cue one.
AB Go Loads selected cue to AB fader pair and plays cue.
CD Go Loads selected cue to CD fader pair and plays cue.
Back Plays the previously numbered cue in the AB fader pair.
Plus Selects the next cue in numerical sequence.
AB Hold Stops fade in progress in AB fader pair.
CD Hold Stops fade in progress in CD fader pair.