User manual

6 - 16 MicroVision FX

Interfacing with MIDI

Follow these steps to connect MIDI equipment to

MicroVision FX

1. Turn console power off.

2. Insert standard MIDI cable into the connector on the back of the

console labeled MIDI In

3. If you are sending MIDI commands from the console, insert another

standard MIDI cable into the connector on the back of the console

labeled MIDI Out.

4. Turn console on.

5. Press [Set Up] to display Set Up Menu

Then select 7, Options, and

press [Enter] to display the Options menu.

6. Select 5, Select MIDI channel, and press [Enter]

7. Enter the MIDI channel you will use, and press [Enter]

Verify that

your MIDI equipment is also set to the same channel

. MicroVision

will ignore MIDI commands on other channels.