User manual

5 - 12 MicroVision FX
Formatting disks
Before you can use a disk in an MicroVision FX , you must format it on a
MicroVision FX console. Disks formatted on other ETC consoles or on a
standard personal computer do not work in MicroVision FX . To format a
disk, follow these steps:
Warning: Formatting a disk erases all information recorded on it. For-
matting does not affect show in console.
1. Press [Set Up].
2. Insert standard 3.5-inch double-sided, double-density disk in disk
drive.
3. Select 3, Format disk, and press [Enter].
4. To format the disk, press [Enter]. To cancel the format command,
press [Clear].
Warning: When you select this option, any fades in progress stop; you
cannot restart them except by reselecting cues from Stage and pressing
[Go] again.