Technical data

Installation TTR31, TTR35
8 Endress+Hauser
3. 4 Installation instructions
T09-TTR31xxx-11-00-xx-xx-000
Fig. 4: Possible installation options for temperature monitoring in pipes
m TTR31
n TTR35 for use in hygienic processes
Mounting instructions:
• Installation at angle pieces, against the direction of flow (→ Fig. 4, Item A).
• Installation in smaller pipes, inclined against the direction of flow (→ Fig. 4, Item B).
• Installation vertical to the direction of flow (→ Fig. 4, Item C).
• The on-site display can be rotated electronically 180° − see section 5. 1 "On-site operation".
• The housing can be rotated up to 310°.
"
Caution!
Do no thread into process connection by turning housing. Always use a wrench (see table,
→ Chap. 3. 3) on the process connnection fluts (→ Fig. 4, Pos. 1) to tighten the sensor into
the process connection.