Technical data

Maintenance TTR31, TTR35
22 Endress+Hauser
5.2.2 Hints for the configuration with Readwin
®
2000
Comprehensive information on the ReadWin
®
2000 configuration software may be found in
the Operating Instructions BA137R/09/en.
5.2.3 Hints for the configuration with FieldCare
FieldCare is an universal configuration software based on FDT/DTM technology.
!
Note!
• To configure the Thermophant
®
T TTR31/35 with FieldCare the “PCP (ReadWin)
Communication DTM” and the Thermophant Device-DTM are required.
• All devices with software version 1.01.00 or higher can be configured with FieldCare.
• The device supports only offline configuration and up-/download of parameters. The online
configuration is not supported.
Detailed information concerning FieldCare may be found in the operation manual (BA027S/c4)
or see: www.endress.com.
6 Maintenance
Any buildup on the sensor can have a negative effect on the sensor response time. For this rea-
son, check the sensor for buildup at regular intervals.
"
Caution!
Make sure the process is unpressurized before you remove the device! Do not twist the device
out of the process connection thread at the housing. Always use a suitable open-ended wrench
for disassembly work (→ Chap. 3. 3 and → Fig. 4).
INFO Device release
(change status)
Hardware version
Software version
Function group Description