User manual

Pro-Magic Plus User Manual
Copyright © by Wasay Software Technology Inc. 2
Chapter 2 Installation Guide
Section 1 – System Requirements
 First OS must be Windows 98 SE/ME/2000/XP
 Support Only Windows OS (No Linux)
 Windows server OS and Windows NT not supported
 Minimum of Intel 486 or above, 16MB of memory or above
 Minimum of 500MB free/usable space or above
 Supported Partition Structures
PRIMARY partition + EXTENSION partition
PRIMARY partition + PRIMARY partition
**(Not Supported Partition Structures)
PRIMARY partition + PRIMARY partition + EXTENSION partition
PRIMARY partition + PRIMARY partition + PRIMARY partition (for special recovery partition only)
 Support for SCSI Hard disk
Pro Magic Plus only supports SCSI hard disk with Windows 2000 or OS above
Section 2 – Notice Before Installation
1. Before install Pro Magic Plus, turn off all anti-virus software. (Include BIOS anti-virus function)
2. Pro Magic Plus does not support multiple PRI partitions. If you have multiple PRI partitions, please
repartition your HD before installation.
3. If your HDD is not fully partitioned (with un-partitioned/unused space at end of HDD), please
repartition the HDD before install Pro Magic Plus.
4. Please note you CANNOT undo the restore after executed it. Once you have executed restore of
your system drive (C:/ ), you will never be able to retrieve back 'restored' system & data.
Section 3 - Start Installation
1. Insert Pro Magic CD-ROM disk (auto-run).
or Open Pro Magic CD-ROM disk, and double-click on the ‘Setup.exe’ icon.
2. Choose “I accept the agreement (A)”, and click “Next” to continue.