User manual

Pro-Magic Plus User Manual

save or create new restore point.” message.

A24. This is because the buffer area is full, and because cannot ensure data in boot disk are well and

complete, so ‘Save’ or ‘Create New Restore Point’ is not allowed, please directly execute ‘Restore’

function. If you wish to keep the current system state, please go to MANAGER Mode (press F10)

and select ‘Remove’ option, and you will be able to ‘Save’ before remove the product. Please be

cautious once SAVED the current state, you will not be able to restore back to previous state, so make

sure your system is well and functioning properly.

Q25. I want to enter Protection Mode (user mode), but Pro Magic Plus prompts “Driver does not exist or is

damaged, cannot protect.” Message.

A25. Pro Magic Plus did not find its driver required for activating protection. Go to MANGER Mode’s (No

Protection Mode) “Setup” option to enter Windows and reinstall Pro Magic Plus again or enter

Windows from MANAGER Mode and delete un-required files under root directory, then reinstall Pro

Magic Plus again. If same message still appears, set ‘Do not check driver’ option under ‘Driver’

function in MANAGER Mode, then you will be able to enter the OS; however, if driver gets damaged

or deleted, you will lose the protection function.

Q26. I want to enter other boot disk, but Pro Magic Plus prompts “Before switch boot disk, please choose

to restore or save” message. Why?

A26. Pro Magic Plus requires space to save and switch data when switching boot disk(s), and because

protection buffer area is full, so it requires to ‘restore’ or ‘save’ to clear out buffer area space for

switching.

Q27. I want to enter Protection Mode, but Pro Magic Plus prompts “Boot disk has too many damaged data,

it’s suggested to restore or save before activate system” message, why?

A27. This message will be displayed when buffer area reaches or exceeds 90% full, if continue to activate

OS, you may not be able to enter the OS because the buffer area is full. If you skipped to ’save’ or

‘restore’ at this stage, then when buffer area is 99% full, you will only be able to ‘restore’ and will NOT

be able to ‘save’ the system. If you wish to keep the current system state and data, please go to

MANAGER Mode (press F10) and select ‘Remove’ option, and you will be able to ‘Save’ before

remove the product. Please be cautious once choose ‘Save’, there will be NO chance to revert any

changes or damages, so make sure your system is well and functioning properly.

Q28. I changed partition format (FAT/NTFS) of boot disk under Protection Mode and reboot computer, then

Pro Magic Plus prompts “Boot disk is under protection mode, before activate OS, please select to

‘restore’ or ‘save’ it” message. Why?

A28. Because changing boot disk’s partition format under Protection Mode will easily cause system error,

so Pro Magic Plus prompts this message, please follow the instruction to avoid unrecoverable errors.

Q29. I want to install Windows 2000/XP or upgrade Windows 9x series to Windows 2000/XP under

Protection Mode, when I reboot boot disk to Protection Mode, prompts “Boot disk is installing OS,

please enter MANAGER mode to continue installation or choose ‘restore’” message. Why? What

should I do?

A29. If executing great changes of the system under Protection mode, Pro Magic Plus will detect

incomplete system installation files when boot into the system. When this message appears, go to

Pro Magic Plus’s MANAGER mode  setup option to enter the OS, then you may continue with

system upgrade before enter Protection Mode again.

(CAUTION: For system upgrade or OS installation, please do it under MANAGER mode (no

protection mode) or remove Pro Magic Plus before system upgrade or OS installation.)