User manual

Pro-Magic Plus User Manual
Copyright © by Wasay Software Technology Inc.
35
A17. Reboot computer, and after computer finished detecting BIOS, a line will appear “Starting Pro Magic
Plus…”, hold down ALT key and continuous tab F10 key until Pro Magic Plus menu appears.
Q18. I forgot my user/manager password, what should I do?
A18. Pro Magic Plus does not have a master password, if you have forgotten your manager password, you
may use the SHOWPASS.COM program in the installation CD to retrieve your password. Please
prepare a Win98 boot disk, and copy SHOWPASS.COM to this disk and then boot the computer with
this disk. Next , execute SHOWPASS.COM and enter your installation serial number (must be the
serial number you have entered when installing Pro Magic Plus), and SHOWPASS.COM will display
your manager password on the screen..
Q19. Can I run disk scan and defrag after installed Pro Magic Plus?
A19. You may run scan disk and defrag under MANAGER Mode (No-protection mode), but DO NOT do it
under USER mode (protection mode), because if your data size of your partition is too much, it will fill
up the protection buffer area of Pro Magic Plus, and you will only be able to choose to restore your
computer when the buffer area is full.
Q20. I have set some configurations after successfully installed Pro Magic Plus, and then I cannot enter
the OS from either MANAGER mode or USER mode. Why?
A20. Possible causes and solutions as below:
a. Turned on Pro Magic Plus’s HD/BIOS Protection function (only available in special version).
[Solution] Press F10 at USER mode of Pro Magic Plus to enter MANAGER mode, select
‘Configure’ -> ‘HD/BIOS Protection’, and set it ‘No Protection’.
b. Anti-virus software has been activated.
[Solution] Turn off BIOS’ virus detection option.
If the solutions above cannot solve the problem, please contact Wasay service center.
Q21. I have set to activate ‘Prevent Floppy Startup’ option and reboot computer, and then the computer
crashed.
A21. Some versions of AMI BIOS have bug which conflicts with ‘Prevent Floppy Startup’ function. Unplug
your HDD and plug it to another NON-AMI BIOS motherboard then startup, and turn off ‘Prevent
Floppy Startup’ option, then move the HDD back to the original computer.
Q22. I have tried to install on other boot disk with DOS/Windows 95 OS, but failed to install Pro Magic Plus,
why?
A22. Microsoft DOS/Windows 95 do not support FAT32 format partition, and partition cannot locate after
2G, this is OS’ own restriction.
Q23. After installed Pro Magic Plus and used for a period of time, when I tried to create new restore point
after reboot, but prompts “Insufficient boot disk space, cannot create restore point” message.
A23. This is because there is error when creating file(s) on boot disk. For FAT format system, it is the
boot disk has no more space; and for NTFS format system, it is the data in current partition are too
messy and too much so it cannot find continuing spare space. Please select ‘Restore’ or ‘Save’,
and then enter OS from ‘Setup’ option under MANAGER mode, then remove some program or
delete some files.
Q24. When Pro Magic Plus is under Protection Mode and reboot computer and tried to execute ‘Save
Initial Point’ or ‘Create New Restore Point’, Pro Magic Plus prompts “Boot disk is damaged, cannot