User manual

Pro-Magic Plus User Manual

Section 6 - Remove

You can remove Pro Magic Plus via Windows configuration interface or under DOS mode. Before uninstall,

the system will ask you to execute ‘restore’ or ‘save’. If you have not saved the system or have important

data not backed up in the boot disk, please save them in advance. Otherwise all unsaved data will be

restored. To reinstall Pro Magic Plus again, you must reboot computer once again before reinstall.



NOTE

: 1. If selected Save function when uninstall, please make sure your system status is normal, otherwise if

you saved system with problem status, you will have no chance to restore back to normal status.

You may also save an OS that cannot startup normally.

2. If selected Restore function when uninstall, please make sure the data that you want to keep are

already backed up to other partitions or media, otherwise data created after the restore points will all

be gone forever once selected to restore. You will NOT be able to get those deleted data back.

3. If you encountered situation where protection buffer area is 99% full, but do not wish to lose un-saved

data after executed ‘Restore’ function, and want to save current system status instead, you will be

able to choose to save the system when remove Pro Magic Plus. However, please be aware once

selected ‘Save’, there is NO change to revert any changes or damages.