User manual

Pro-Magic Plus User Manual

Scheduled Multi-Point

If you do not want to create restore point(s) by yourself, or if you need to create a restore point

each day, you can also schedule to create multi-point at a regular basis; and Pro Magic will

automatically create a multi-point of the computer state at the scheduled time. Go to MANAGER

MODE (F10) configure  startup methods  scheduled multi point. (use Pg Up/Pg Down key).



NOTE

: (If the computer is off at the scheduled time, Pro Magic will create a multi-point of the

computer state when you turned on the computer next time).

Keep at last startup status (Hide Menu)

Directly enter OS without displaying Pro Magic Plus USER mode menu. 

NOTE

: To call out the

menu (under DOS), hold down ALT key and continuously tab on F10 key several times when see

the line ‘Starting Pro Magic…..’.

2. Driver

Pro Magic requires driver to enable protection under Windows. If the driver is damaged or

cannot be found, Pro Magic Plus may not be able to protect the system. Therefore, it’s

recommended to ‘check’ driver (default setting).

If you cannot activate OS after installed Pro Magic Plus, and showed driver not installed or

damaged message, you can try to set it to ‘Do not check’, and then you should be able to enter the

OS.

Check

This will check Pro Magic Plus’ driver at each startup. Error message will be displayed when

the driver is not found or damaged.

Do not check

This will not check for Pro Magic Plus’ driver when startup the computer.