User manual

Pro-Magic Plus User Manual

Section 2 – Restore

There are two restore options: restore and multi point restore (Disable item for OEM version) (which

need to have created multi point previously.) The difference between restore and multi point restore, is

that restore only has one restore point (the initial point), where multi point restore has a list of

previously-created restore points to choose from. Each one is explained in detail below.

Restore

Basically restore is restoring the computer back to an earlier state from a previous restore point. (If you

have not created a restore point before, then Pro Magic Plus will restore your computer back to the state at

the time when you firstly installed Pro Magic Plus.)

Multi-point Restore (Disable item for OEM version)

With multi-point restore, it follows the same procedure, except that when you clicked on the ‘restore’

button, you will see a list of time points to choose from. (see the picture below). The priority is, you will

have to have created multi point before restoring, or you will only be able to use the normal ‘restore’ option.

Both restore can be done under Windows or DOS mode.

It also can be done under MANGER MODE, however, if you are using Pro Magic Plus’ multi-boot function,

all the boot disks (OS) will be restored to initial point.