User manual

Pro-Magic Plus User Manual

Drivers

Pro Magic requires driver to enable protection under Windows. If the driver is damaged or

cannot be found, Pro Magic Plus may not be able to protect the system. Therefore, it’s

recommended to ‘check’ driver (default setting).

If you cannot activate OS after installed Pro Magic Plus, and showed driver not installed or

damaged message, you can try to set it to ‘Do not check’, and then you should be able to

enter the OS.

Check

This will check Pro Magic Plus’ driver at each startup. Error message will be displayed when

the driver is not found or damaged.

Do not check

This will not check for Pro Magic Plus’ driver when startup the computer.

2. User Management

You can use this function to change username (OS name) and set manager password and user

password. You must set manager password before you can set user password.



NOTE

: You WILL NOT be able to use Pro Magic Plus if you forgot your password, so please

keep your password at a safe place where you can remember.

Username

Change the name of the OS (displayed at USER MODE menu).

User password

You can set password for each OS, and you will only be able to use remote control function if enter

OS with user password.

Manager password 

You can use all functions if enter OS with manager password. Manager password is greater than

user password.

Confirm manger password

