User manual

Pro-Magic Plus User Manual

Section 4 - Save

1. Save C Partition

Save C partition as initial point 

This will save the current system status into initial point, and all other restore points (multipoint) will

be erased. If you don’t want to lose other restore points, you can choose to save the system into

another multi point.

Save C partition as a multi point (Disable item for OEM version)

This allows you to save the current system status into a multi restore point. You can create

unlimited multi restore points, and you can name each new points created.



NOTE

: 1. Save C partition must reboot to be valid. So please follow instruction to immediately reboot

when executing this function. Otherwise if computer got damaged or attacked by virus before

reboot, Pro Magic Plus will actually saved PROBLEM state when reboot after damage is done.

2. If you have been using Pro Magic Plus for a long period, and buffer area is 99% full, you will NOT

BE ABLE to run ’Save’ function, but ONLY ABLE to run ‘Restore’ function. This is because buffer

area has no more space to record changes. It is recommended to ‘Save’ your system

constantly to avoid forever lose un-saved data when you only have the option to ‘Restore’

computer to release buffer area space.

3. If unfortunately you do encounter the situation above, but do not wish to lose un-saved data after

executed ‘Restore’ function  DO NOT choose ‘Restore’ function, but reboot the computer instead,

and go to MANAGER MODE’s ‘Remove’ function. Pro Magic Plus will ask if you would like to

‘Restore’ or ‘Save’, and you can choose ‘Save’ to keep un-saved data. ***

IMPORTANT

: Once choose

‘Save’, there will be NO chance to revert any changes or damages.