Specifications

TM 05539-IN
FUNCTION CHECK - CONTINUED 0020 00
0020 00-2
FUNCTION CHECK - CONTINUED
8. Load five dummy rounds in magazine assembly.
9. With safety on, insert magazine assembly with dummy rounds into magazine well.
10. Cycle bolt in and out of battery to check feeding, chambering, extracting, and ejecting.
WARNING
The ability of the weapon to fire by manipulation of the bolt in and out of battery without pulling the
trigger is known as “slam firing”. Should the weapon slam fire, evacuate to Intermediate Mainte-
nance. Failure to follow this warning may cause injury or death to personnel.
11. Check for slam fire condition.
12. With safety on, attempt to fire weapon. Weapon should not fire.
NOTE
If trigger is hard (heavy) or very easy (light) to pull, trigger may not be within the weight standards;
evacuate weapon to IMA. Only a MOS 2112 is authorized to make this weight adjustment. Failure to
follow this warning may cause injury or death to personnel.
13. With the safety in FIRE position, attempt to fire weapon. Weapon should fire.
END OF WORK PACKAGE