Specifications

TM 05539-IN
REASSEMBLY OF WEAPON - CONTINUED 0019 00
0019 00-2
REASSEMBLING THE WEAPON - CONTINUED
2. Magazine Assembly
.
a. Compress spring (4) to identify longest leg.
b. Slide the longest magazine spring leg underneath
the magazine floor plate (2) until it is fully
seated. Slide the short leg inside the follower (3)
until it is fully seated. To avoid feeding prob-
lems, ensure that the short leg of the spring is
inside the follower, not the floor plate.
c. Install follower (3) in magazine assembly (1).
d. Compress spring (4) with floor plate (2).
e. Attach floor plate (2) to magazine assembly (1).
3. Function Check
. See Function Check (WP 0020 00)
in this manual.
END OF WORK PACKAGE
2
4
3
1
M40-044