Specifications

TM 05539-IN

FIRING PIN ASSEMBLY - CONTINUED 0014 00

0014 00-2

DISASSEMBLY

No disassembly of the firing pin assembly (1) is authorized. Remove the firing pin assembly from the bolt body assem-

bly. Refer to Bolt Assembly Maintenance (WP 0013 00) in this manual.

INSPECTION

NOTE

DO NOT disassemble the firing pin assembly. Any worn or unserviceable part requires replacement

of complete assembly.

1. Inspect the firing pin assembly for cracks or damages. Ensure that the firing pin tip is smooth and round. Damages or

defects to any part require replacement of the entire firing pin assembly.

2. Verify the protrusion of the firing pin in the face of the bolt. Refer to WP 0013 00 for procedures on checking firing pin

protrusion.

REASSEMBLY

Reassemble the firing pin assembly into the bolt body assembly. Refer to Bolt Body Assembly Maintenance (WP 0013

00) for the procedure on reassembly of the bolt.

END OF WORK PACKAGE

M40-019