Specifications

TM 05539-IN
0011 00-1/(0011 00-2 Blank)
MAGAZINE ASSEMBLY 0011 00
THIS WORK PACKAGE COVERS
Inspection
INITIAL SETUP
Maintenance Level
Organizational
Equipment Conditions
Weapon cleared (WP 0012 00)
WARNING
Always assume every weapon is loaded until it is determined through visual and physical inspection
that it is not. Procedures for clearing/unloading the weapon are outlined in WP 0012 00. Failure to fol-
low this warning may cause injury or death to personnel.
INSPECTION
1. Check the fit of the magazine (2) with the bolt (1) closed. The magazine should insert, lock, and unlock easily.
2. With the magazine (2) in place, pull the bolt (1) back to the rear.
3. Remove magazine (2).
4. Replace magazine (2) if broken or damaged.
END OF WORK PACKAGE
1
2
M40-018
2