Specifications

TM 05539-IN

STOCK ASSEMBLY - CONTINUED 0025 00

0025 00-2

INSPECTION

1. Check all parts for excessive wear, burrs, and cracks.

2. Ensure that sling swivels (11) have spring tension.

3. Ensure that the cheek piece (1) and recoil pad screws (6) are not worn or stripped.

4. Ensure the helicoil inserts (7) on both sides of the stock (3) are not stripped or stretched.

5. Ensure that the bipod stud (8) is not loose or damaged.

6. Ensure the cheek piece (1) locks in place when tightened.

7. Ensure that the bipod assembly (9) is serviceable; this includes ensuring that the legs extend and retract, that the bipod

assembly pivots, and the pod lock (10) locks in place.

8. Inspect stock (3) for cracks. Cracks in the glass bedding will be routed out and reglassed. Refer to Skim Glassing

(WP 0026 00). Stocks are under warranty. If cracks cannot be fixed, request WIR disposition from Material Manager,

Albany, GA.

9. Replace any unserviceable parts.

M40-027