User`s guide

AT&T Global Network Client for Windows Administrator’s Guide
© 2015 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or
AT&T affiliated companies. All other marks contained herein are the property of their respective owners. Images are shown for illustrative purposes only; individual
experience may vary. This document is not an offer, commitment, representation or warranty by AT&T and is subject to change.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
-69-
Limiting Connections Per Operating System
If more than one range of Operating systems need to be defined, then the config.xml will have to be used
instead of the LPE_OS_RANGE putblic property. The following example would allow Vista SP2, Windows 7
SP1 through Windows 8 Update 1.
<agnclient>
<user_interface>
<checkforos lowervalue="6.1.0002" uppervalue="6.1.0002" />
<checkforos lowervalue="6.1.7601" uppervalue="9.9.9999" />
</user_interface>
</agnclient>
See http://msdn.microsoft.com/en-us/library/windows/desktop/aa370556(v=vs.85).aspx for more
information.
Profile Customization Limitations
The Client Profile Customization is an install time only configuration and cannot be updated on demand.
Controlling the AT&T Global Network Client Firewall
The state of the AT&T Global Network Client Firewall is “on”, “off”, or “disabled” and the initial state is
set by specifying the FIREWALL_STATE public property. If it is set to “disabled” you must also request
that your AT&T representative update your Firewall Setting in the AT&T Administration Server to “N”.
NOTE: The FIREWALL_STATE public property sets the initial state only. Once the user connects to the
network, this property may be overridden by the central firewall configuration downloaded from the
AT&T Administration Server.
Network Awareness Customization
The Network Awareness customization provides the ability to define an AT&T Global Network Client
action to be performed when a user connects to a defined network.
The following actions are currently supported using Network Awareness:
• No AT&T Global Network Client connection required, immediately disconnect the AT&T Global
Network Client
• No AT&T Global Network Client connection required, immediately prompt the user to disconnect
the AT&T Global Network Client
• Minimize the AT&T Global Network Client
When the user connects to a network defined to not require an AT&T Global Network Client connection,
the AT&T Global Network Client connect button will be disabled.