User`s guide

AT&T Global Network Client for Windows Administrator’s Guide
© 2015 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or
AT&T affiliated companies. All other marks contained herein are the property of their respective owners. Images are shown for illustrative purposes only; individual
experience may vary. This document is not an offer, commitment, representation or warranty by AT&T and is subject to change.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
-53-
Property Use
XML
Intended Use & Value Information
LPE_OS_RANGE
X
Set this value to prevent connections on specific
Operating Systems. Use the numeric version of an
Operating System(s) you wish to block. Example:
Windows Vista through Windows 7 RTM:
LPE_OS_RANGE=6.0.6000-6.1.7600
Note: The LPE feature does not need to be installed.
LPE_REG
X
Set this value to prevent connections if a specificied
registry hive does not exist in the
HKEY_LOCAL_MACHINE branch. Example:
LPE_REG="SOFTWARE\YourCompany\Asset"
Note: The LPE feature does not need to be installed.
MINIMIZE_AFTER_CONNECTING Set this property to “1” to minimize the main window to
task bar after connecting.
Default: “0”
MINIMIZE_TO_SYSTEM_TRAY Set this property to “1” to minimize the main window to
system tray after connecting.
Default: “0”
MULTIHOMING_CLIENT_ADDITIONS Specifies the VPN Clients to exclude when preventing
multi-homing:
Cisco Client: Cisco
All Cisco Clients: CiscoAll
Juniper Client: Juniper
CheckPoint Client: Checkpoint
Example: MULTIHOMING_CLIENT_ADDITIONS=Cisco
NS_FROM_VPN_SERVER Use the name servers supplied by the VPN server
instead of the values supplied from the Service Manager
PASSWORD
X
Used to specify the password for a pre-configured
profile