User`s guide

AT&T Global Network Client for Windows Administrator’s Guide
© 2015 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or
AT&T affiliated companies. All other marks contained herein are the property of their respective owners. Images are shown for illustrative purposes only; individual
experience may vary. This document is not an offer, commitment, representation or warranty by AT&T and is subject to change.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
-28-
Figure 13: Configure Network Services Screens
Servers
DNS, WINS, and Domain Suffix configuration information is normally stored in the AT&T administration
server. The AT&T Global Network Client automatically retrieves the values and updates the device to use
the supplied values throughout the connection. Click Configure… to to verify or define your server
information.
Figure 14: Servers Configure Button
To override the values defined in the AT&T administration server select Use the following manual
settings and enter the corresponding values.
For WINS and Domain Suffix you also have the ability to select Do not update and the AT&T Global
Network Client will not alter the specified settings when connected.
If you are required to be authenticated by a Windows Domain to logon to your Windows workstation,
you can enable Windows Logon. Select Yes, automatically start this program during Windows logon to
establish a network connection using the AT&T Global Network Client prior to your Windows logon. If
you do not require a Windows Domain authentication to logon to your workstation, select No, do not
automatically start this program.