User`s guide

AT&T Global Network Client for Windows Administrator’s Guide
© 2015 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are trademarks of AT&T Intellectual Property and/or
AT&T affiliated companies. All other marks contained herein are the property of their respective owners. Images are shown for illustrative purposes only; individual
experience may vary. This document is not an offer, commitment, representation or warranty by AT&T and is subject to change.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
-147-
AfterTunneling 1100
AfterConnecting 1200
ConnectedNoVPN 1250
ReattachingToVPNServer 1270
AfterReattachingToVPNServer 1275
Connected 1300
BeforeDisconnecting 1400
Disconnecting 1500
AfterDisconnecting 1600
Disconnected 1700
Exiting 1800
-help
Displays this help window.
-initonly
Initializes the database after a new install and then exits.
-login=LoginProfile
The specified LoginProfile is made the current login profile. If LoginProfile contains spaces it should
be enclosed in double-quotes (for example: -login="my Internet login").
-password=Password
Sets the password for the current login profile, as if Password was entered on the Login window.
-timeout
Changes the timeout properties. Five separate parameters may be included an idle time, a duration
time, a threshold time, threshold bytes and a timeout warning time. All of the times are in seconds.
See Timeout Options for a description of these options. Any of the five parameters can be left
empty to indicate no change or set to zero to disable the timeout. Invalid values will be ignored.